Evolution DX2 series Manuel d'utilisateur télécharger pdf (Page 5)

Rain Master Irrigation Systems DX2 User Manual

Page 258 Appendix B: Current Monitor

Figure 187: Auto Limits

In addition to sequencing through all stations, MV1,

MV2 and the N.O. output currents are also

established.

Note: The pump is not calculated and therefore should be

established by the user manually.

When completed, the Auto Limits Options menu

will be displayed.

Step 4 This completes the Auto Limits procedure.

Press the QUIT key to return to the base screen.

Enabling and Disabling Current Checking

After maximum and/or minimum current limits are entered,

current checking (monitoring) must be enabled for upper and

lower limit detection.

Procedure

Step 1 Advance to the Current Limit Options screen as

follows:

AUTO LIM STA 1 0:02:00 I = 0.00 GPM = 0

|½|

F1=Main Menu

F5=Setup

F3=Stations

F1=Enable/Disable

urrent

1 2 3 4 5 6 7 8 9 10 11

Pas de commentaire

Evolution DX2 series Manuel d'utilisateur Page 5