7
www.evolutionfury.com
SAFETY SYMBOLS
WARNING!
Do not operate the saw if any warning
and / or instruction labels are missing or
damaged. Contact evolution power tools for
replacement labels.
Symbol Description
V Volts
A Amperes
Hz Hertz
Min
-1
Speed
~ Alternating Current
No No Load Speed
Wear Safety
Goggles
Wear Ear Protection
Do Not Touch
Wear Dust Protection
Restriction
of Hazardous
Substances Directive
CE certification
Waste electrical and
electronic equipment
Only use genuine Evolution replacement
blades. Unauthorized blades may be
dangerous! Keep the blades securely
fastened. Check for debris before installing
any new blades and do not use dull or
broken blades. Check the blades regularly for
condition and wear. Damaged or worn blades
should be replaced immediately. Loose
fitting or damaged guards must be replaced
immediately. Beware of ejecting chips as
they may be HOT. Always make provisions
for safe handling of excess material.
To obtain an additional copy of your manual,
please contact Evolution Power Tools at:
UK 0870 609 2297
USA 1-866-EVO-TOOL
WEB www.evolutionpowertools.com
ADDITIONAL SPECIFIC
SAFETY RULES FOR TABLE SAWS
Warning
Before using your table saw it is important that
you read and understand these safety rules.
Failure to follow these rules could result in serious
injury to the operator or damage to the table saw.
a) Always use the blade guard. The blade
guard must always be used in every operation.
b) Hold the work firmly. Against the mitre
gauge or rip fence.
c) Always use push-sticks or push blocks
to feed the workpiece past the saw blade.
d) Keep guards in place and in working
order. Always ensure that the riving knife is
fitted and correctly adjusted. Inspect the riving
knife regularly and replace it if it is worn. Use
only a genuine Evolution riving knife as this is a
dedicated component for this machine.
e) Remove adjusting keys and wrenches.
Form the habit of checking to see that keys
and adjusting wrenches are removed from the
machine before turning it on.
f) Do not use in dangerous environment. Do
not use power tools in damp or wet locations,
or expose them to rain. Keep work area well
lit. Keep the area well ventilated.
g) Keep children away. All children and
visitors should be kept at a safe distance from
the work area.
h) Do not use High Speed Steel (HSS)
blades. Use only saw blades for which the
maximum possible speed is not less than the
maximum spindle speed of the tool and the
material to be cut.
i) The push stick or push block should
always be stored with the machine when
not in use.
(16 pages)
(7 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels